TEST YOUR ANTIVIRUS

You can easily tes your anti-virus program with a simple notepad trick.

1.    Copy & paste the code below in notepad (with out “”)

2.       “ X50!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H* “

3.       Save file as “checkantivirus.com”including quotation marks.

4.       After some time this file scan with your anti-virus . it will surely detect the file a virus,then make sure that your anti-virus running properly unless you want to change your anti-virus

                                                                                              

                                                    THANK U…

                                                                                                           anoop

                                                                                                                     

HOW TO DE- FRAGMETING LOCAL DISK C ?

HOW TO DE- FRAGMETING LOCAL DISK C ?

11.Right click of local disk c.

22.   Click the properties.

33.   Click lools tab.

44.   Click “Defragment now”.

55.   Click defragment.

                                 THANKU

                                                                       anoop

AVAST ANTIVIRUS LICENCE KEY UNTILL 19/01/2038

AVAST  ANTIVIRUS  LICENCE KEY   UNTILL  19/01/2038

Avast antivirus registration key till 19/01/2038

W6754380R997840910-4TZ59467

HOW TO CRACKE YOUR MOBILE PHONE SECURITY CODE?

Perhaps you changed your Nokia phone security code in a hurry and forgot the next time you're to use the phone. It might even be that someone else did or you might just decide to read someone else's phone security code, just for fun :) Whatever the case may be, this tutorial explains how to read a Nokia phone existing security code without necessarily changing it back to the default 12345 or flashing the phone.

[ANT] Simple is a tiny program that reads the security code of any Nokia phone that supports USB connection mode.

1. Downoad [ANT] Simple

2. If you have Nokia PC Suite running, be sure to close it by exiting from the taskbar icon.

3. Extract [ANT] Simple ] and run Simple.exe located in the folder

4. Connect the phone vis USB to the computer

5. On the MAIN tab, click on GET. Your phone IMEI number and model should be displayed on the bottom panel

6. Now click on the SERVICE tab and click on GET button under USER CODE

7. Your security code should now be displayed on the right side of the application window.

HOW TO REMOVE STARTUP PROGRAMS IN WINDOWS 7 ?

HOW TO REMOVE STARTUP PROGRAMS IN WINDOWS 7  ?

This will speed up your windows 7 startup (boot).

Click on start menu and type  msconfig in the search box and open it. Select the startup tab and

Uncheck the programs you don’t want to start during startup. Click on Apply , then Ok.

                                                                                                         “THANKU”

                                                                                                                                            anoop           

HOW TO KNOW WIFI HACKING?

HOW TO KNOW WIFI HACKING?

If your internet is slow then you check if someone hacked in your WIFI. It will solve

By few steps. (Wireless Network Watcher v1.55 )

Step :1

 Go to www.nirsoft.net and download Wireless Network Watcher v1.55.

Step : 2

  Install it on your pc and scanning. It scans your Wireless Network and displays the list

Of all computers and devices that are currently connected to your network.

For every computer or device that is connected to your network, the following information is displayed IP address, MAC address , the company that manufactured the net work card , and optionally the computer name

CASE: 2

If you want to check if someone hacked in your WIFI without installing any software then you should log in your router . If anyone is connected to your network it will be shown in your router security setting. You can log into your router, usually http://192.168.1.1 You can check your router IP address  using command prompt.

Step: 1

Run command prompt (cmd)

Step: 2

Type ipconfig and press enter

Step: 3

Ipconfig will list your ip , MAC and default gateway address. You can access to your router settings by typing default  gateway address in your web browser.

Step: 4

Log in your router and look at the home network Devices, this shows all IP addresses connected to your network.

                                                                  THANKU

                                                                                                    anoop